Selasa, 25 Agustus 2009
Free Download Sound Driver avance

First-time driver installation

This section is for users who have not installed an AD1812 evaluation
board in their system before. If this applies to you, please follow this
procedure.

1. Confirm that the AD1812 evaluation board is jumper-configured to
operate in PnP mode by inspecting the JP10 jumper. The left and center
pins should be shorted by the jumper to select PnP mode.
2. Insert the board into a free ISA-bus expansion slot in your computer.
3. Power up the computer and start Win95. Win95 will notify you that it
has detected new hardware and will try to configure resources for it.
4. When prompted by the Win95 Device Manager, insert the driver
installation disk in your floppy drive and click "Ok". If the Device
Manager complains that it can't locate any of the required files, make
sure that it is looking for them on your floppy drive! If you get such
error, simply type in the path to your floppy drive and click "Ok".
5. Device Manager will install drivers for the first three of the five
AD1812 logical devices and then request a system restart. This is
normal and required. Click "Yes" to restart Windows.
6. After the restart, Device Manager will go to work again and install
drivers for the remaining two AD1812 devices.
NOTE: The 5th and last logical device is the Modem logical device.
If the AD1812 has been configured on your board to support PnP for
an external modem chipset, his device configures as a standard COM
port by Win95.
7. You're done.

---------------------------------------------------------------------------------------
Disabling the AD1812 logical devices

After installation is completed, you may want to disable AD1812 devices
which you do not intend to use in order to free up their resources for
other devices.

To disable a particular AD1812 device, perform the following steps:

1. Open the Windows 95 Control Panel.
2. Open the "System" applet.
3. Click on the "Device Manager" tab.
4. Scroll down to the "Sound, video, and game controllers" device class.
5. Double-click the device class to show all devices in this class.
6. Double-click the device you want to disable to bring up its Property
Page.
7. In the "Device Usage" pane of the "General" tab of the device's Property
Page, uncheck all configurations listed.
8. Click "Ok".

Note that disabling a device by this procedure is not the same as
"Removing" the device using the "Remove" button of the "Device Manager".
"Removing" a device unloads its drivers, and then breaks the association
between the device's PnP hardware ID key and the drivers in the System
Registry. Subsequently, restarting Win95 will cause the Configuration
Manager to re-establish the association in the System Registry based on
information retained from the first installation. This is why we "Disable"
instead of "Removing".

---------------------------------------------------------------------------------------
Mixer32.exe application

Essentially, all of the AD1812's line and mixing features can be
controlled using Microsoft's Mixer application (speaker icon in the System
Tray). We have also included our own mixer application which has some
features you may find useful. For example, our mixer allows you to
customize the displayed labels for each of the input and record sources.
Simply copy MIXER32.EXE to your desktop and it will be ready to use.

GAIN CONTROL SLIDERS:

* HOME = set gain to zero
* END = set gain to full scale
* PAGEUP/PAGEDOWN = course gain adjust
* UPARROW/DOWNARROW = fine gain adjust
* TAB = select next control
* ENTER (or double click) = open/close Enhanced View (Master
Playback & Record Gain control sliders only)
* MOUSE CLICK = set gain to current mouse position setting
instantly
* MOUSE DRAG = drag gain setting to current mouse position

BALANCE CONTROLS:

* HOME = set balance 100% to the right channel
* END = set balance 100% to the left channel
* INSERT = center the balance
* PAGEUP/PAGEDOWN = course balance adjust right/left
* RIGHTARROW/LEFTARROW = fine balance control right/left
* MOUSE CLICK = set balance to current mouse position instantly
* MOUSE DRAG = drag balance to current mouse position

MUTE CONTROLS:

* SPACEBAR = toggle mute on/off
* MOUSE CLICK = toggle mute on/off

Free Download Sound Driver avance

this included:
soundcard driver 1812
soundcard driver 1815
soundcard driver 1816
soundcard driver 1845
soundcard driver ac97

posted by hacker top @ 06.42  
0 Comments:
Posting Komentar
<< Home
 
HOME


Name: hacker top
Home:
About Me:
See my complete profile

Previous Post
Archives
Links
Free Blogger Templates

Search Engine Optimization SEO